1. Design Positioning & Pre-site Survey

1.1 Design Principles

1.2 Key Site Survey Points

• Water Area Conditions: Measure water area dimensions, water depth and pool bottom conditions on-site; inspect anti-seepage and water supply/drainage systems to define the effective performance area.
• Environmental & Climatic Conditions: Collect local data of wind, rainfall and low temperature to prevent water splashing disturbance and equipment frost damage; confirm optimal viewing angles and eliminate blind viewing zones.
• Engineering Support: Verify power load and pipeline routes; plan equipment rooms, maintenance passages and pedestrian evacuation areas to comply with safety specifications.
• Compliance Requirements: Align with urban landscape standards, noise control and water-saving environmental regulations; determine reasonable performance hours and volume thresholds.

1.3 Theme & Duration Positioning

2. Design of Four Core Systems

2.1 Dynamic Water Shape System

• Majestic Main Water Shapes: High-pressure blast nozzles and super-high vertical nozzles (10–30 meters) deliver strong explosive power, matching music climaxes and forming the core visual focus.
• Rhythmic Flexible Water Shapes: 2D NC swinging, fan-shaped and arch nozzles produce dynamic waves, running water jets and water arches, adapting to gentle and lively music rhythms.
• Atmospheric Special Effects Water Shapes: Mist, bubble and water curtain systems create a hazy fairyland atmosphere and serve as carriers for light, shadow and laser effects.
• Custom Featured Water Shapes: Digital water curtains display dynamic lines and text patterns to visualize thematic cultural elements.

2.2 Light & Shadow Special Effect System

• Basic Underwater Lights: Colorful/warm-white waterproof LED lights brighten the water body, supporting both daily landscape lighting and performance effects.
• Contour Effect Lights: Lateral projection lights and wall washers outline water column trajectories and enhance the three-dimensional sense of waterscapes.
• High-end Special Effect Equipment: Full-color lasers and water curtain projections present geometric light patterns, starry sky totems and thematic videos to create an immersive visual experience.

2.3 Music & Audio System

• Custom Soundtracks: Match scenarios with folk music, symphony, pop and electronic music, with segmented editing to fit performance rhythms.
• Sound Field Configuration: Outdoor waterproof surround speakers deliver uniform dead-angle-free sound with noise reduction, meeting urban noise control standards.
• Precise Synchronization: Millisecond-level response to music intensity and drum beats eliminates desynchronization of sound, water and light effects.

2.4 Intelligent Control System

• Automatic Performance: Preset multiple programs for timed start/stop and cyclic playback without manual duty.
• Multi-mode Switching: Five optional modes including tranquil mode, daily performance mode, festival special effect mode, interactive mode and maintenance mode to meet diverse demands.
• Immersive Interaction: Optional voice and somatosensory interaction modules allow water and light effects to respond to tourists’ sounds and movements.
• Intelligent Protection: Built-in protection mechanisms against electric leakage, overload, water shortage, low-temperature freezing and strong winds to ensure equipment and personal safety.

3. Standard 15-Minute Performance Narrative Structure

1. Tranquil Opening (0–3min): Gentle water flow, light mist and soft lighting with soothing music to set off a peaceful atmosphere.
2. Gradual Rhythm Build-up (3–8min): Accelerated music rhythm with swinging water shapes and wave running jets activated sequentially, accompanied by gradient lighting to enrich layered visuals.
3. Full-scale Climax (8–13min): Music reaches its peak with super-high water jets, air blasts and array running springs fully activated; lasers, projections and stroboscopic lights create a stunning audio-visual impact.
4. Echoing Closing (13–15min): Music softens, intense special effects fade out, leaving gentle water flow and soft lighting for a calm and impressive ending.

4. Craftsmanship, Energy Saving & All-weather Adaptation

4.1 Equipment Selection

4.2 Water & Energy Saving Design

4.3 All-weather Seasonal Adaptation

5. Construction Process & Acceptance Standards

5.1 Construction Process

5.2 Core Acceptance Standards

• Stable water shape operation without stuttering, deviation or leakage;
• Accurate synchronization of sound, light, water and shadow with smooth effect switching;
• Qualified electrical insulation, waterproofing and grounding; compliant noise level with no potential safety hazards;
• Normal operation of water circulation, energy saving, anti-freezing and safety protection functions.

6. Operation, Maintenance & Upgrading

• Daily Maintenance: Regular water cleaning, filter inspection, equipment troubleshooting and parameter calibration to ensure stable operation.
• Program Upgrading: Customizable exclusive programs for festivals and events, supporting modification and iteration of existing performances.
• System Expansion: Reserved expansion interfaces support subsequent upgrades of cloud management, AR special effects and interactive devices.

7. Scenario-based Customization

• Cultural & Tourist Scenic Spots: Focus on cultural narration with water curtain storytelling and traditional Chinese style special effects to build iconic performing waterscapes.
• Commercial Complexes: Adopt high-frequency short performances, trendy light effects and interactive features to adapt to crowded commercial atmospheres.
• Urban Parks: Low-noise and energy-saving design with ecological and tranquil styles, suitable for both daytime landscape viewing and nighttime light performances.